This sticker is back adhesive, made with a glossy white vinyl.
Prep surface by wiping clean with a rag or paper towel and rubbing alcohol or soap and water. To remove any dust particles, wrap some tape sticky-side out around your finger and gently tap surface to pick up lint.
Firmly rub a credit card across the clear transfer tape to remove any air bubbles.
Slowly peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat the previous step.
Turn the sticker over and slowly lower onto the surface. Rub it in place firmly with a credit card.
For best results, wait 24 hours before slowly peeling the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. Use a credit card to press the sticker as needed.
Only 50 left in stock
20% of Proceeds are Donated to Provide Body Armor for K9 Police Dogs